Decorative Asphalt

Decorative Asphalt is a term that describes various processes that are used to enhance the beauty and functionality of your hardscape asphalt and concrete surfaces. Lot Lines Striping and Sealcoating offers our customers Friction Paving services for asphalt and concrete surfaces, Asphalt Stamp and Color services which we apply to asphalt surfaces, as well as ThermoPrintTM inlaid patterned thermoplastic for use in crosswalks, walkways, exit and entrance ramps and safety zones such as those found in schools and hospitals. Lot Lines Striping and Sealcoating is a factory trained and approved installer for all of these decorative asphalt solutions. Read the sections below for information on these additional services offered to our customers.

Friction Paving

The "Friction Paving” surfacing system provided by Lot Lines Striping and Sealcoating, consists of applying a specially formulated two-part binder which is topped with a pigmented or natural stone. This system provides a D.O.T. approved skid resistant and durable surfaces on both Asphalt and Concrete. Friction Paving can be applied onto existing asphalt and concrete or on newly placed, cured surfaces. The stone material that is applied to the top of the surface is available in a few choices of stone, as well as a variety of colors.

Contact us for more information!

    Typical applications for FrictionPave™ include:

  • Pedestrian Cross Walks
  • Safety Zones... Schools and Hospitals
  • Driveways and walkways
  • Bicycle lanes
  • Exit and entrance ramps
  • Sharp corners and dangerous curves

Asphalt Stamp and Color

The “Asphalt Stamp and Color” surfacing system provided by Lot Lines Striping and Sealcoating, is produced by stamping a template into freshly placed or re-heated asphalt. This is then followed by the application of a polymer modified coating. Stamped Asphalt Coatings provide durable, attractive, and slip-resistant coatings that are available in a wide choice of colors. You can also choose from a variety of stamping patterns and color combinations to create any desired look. Our coatings are applied at a minimum of 30 dry mils and as thick as 75 dry mils... depending on the application.

Contact us for more information!

    Features and Benefits:

  • Stamped into Asphalt
  • Fast Installation with little project downtime
  • Easily repaired with invisible seams
  • Salt resistant for coastal applications
  • UV stable coatings that maintain color for years
  • Simple to Complex Patterns
  • Custom Patterns and Logos

ThermoPrint™ patterned inlaid thermoplastic

The “ThermoPrint™  patterned inlaid-thermoplastic” striping system provided by Lot Lines Striping and Sealcoating, is produced by stamping a template pattern into freshly placed or re-heated asphalt using a vibratory plate. This is then followed by the application of a die-cut thermoplastic material that is then placed into this imprinted pattern and then bonded to the asphalt surface through a heat fusion process. There are 6 standard colors available to choose from, along with a variety of template patterns.  We also can produce this material in any custom color your project may require.  We recommend that an actual color sample be viewed for your approval prior to finalizing your color selection.

Contact us for more information!

    Typical applications for ThermoPrint™ include::

  • Pedestrian Cross Walks
  • Safety Zones... Schools and Hospitals
  • Driveways and walkways
  • Exit and entrance ramps
Please contact us with any questions you may have or to discuss a future project requiring these asphalt surface enhancement processes.

Our Commitment

We strive to deliver a level of service that exceeds the expectations of our customers.

If you have any questions about our products or services, please do not hesitate to contact us. We have friendly, knowledgeable representatives available seven days a week to assist you.

Twitter

Contact Us

Phone: (844) 777-2948
lotlinesestimates@gmail.com

2200 Montclair Road
Leesburg, FL 34748
USA